Permit us to recover the switch should a configuration be committed which Then save this configuration as the "rescue" configuration. Switch's MGMT interface into the 10.30.1 network. You are doing the configuration on a dhcp network and you don't have any static
Reason you want to set the management interface to be a dhcp client (because Management interface (the port on the back)'s IP addressĭefault gateway for the management interface Set interfaces me0 unit 0 family inet address 10.30.1.99/24 Set system root-authentication plain-text-passwordĮncrypt the password and place it in the config. Use the passwd command to set the root password. The switch, you should substitute those for the relevant points in the example
If you have a pre-allocated name and IP for I am in jweb now got it configured with the help of this article here, now need to work out how to setup the VLANs, thanks for your help Aaron.Īddress for a switch being set up. I can private message you if you'd prefer that? Cheers When ethernet-switching family is configured on an interface, no other family type can be configured on the same interface. So after I do the show command it looks like this now for two interface:īut when I try to commit the changes I commit Is there another way to connect to it remotely without having to use the console port? I patched a cable into the management port and tried browsing to the IP I've setup 192.168.1.18. Set interfaces me0 unit 0 family inet address 192.168.1.18/24 Level 50 # Warning: 'level' is deprecated Can't see any IP configuration in there though, what IP does the switch have in my network for show That what I get when I do the show command. Hope one of the experts here can help me out here Tried factory reset twice already but never comes up with the default IP so I think there is something not right. When I plug in my laptop into port 0/0/0 an IP gets assigned to it 192.168.0.210 but I don't know what IP the switches webinterface is on? I did a IP scan and only find 192.168.1.155 but it is saying connection refused. The switch can assign an IP address to the management PC in the IP address range 192.168.1.2 through 192.168.1.253.
I plugged in my laptop into port 0 as described in this Juniper articleĪs per the article: " These ports are configured as the DHCP server with the default IP address, 192.168.1.1. Now want to connect to the web interface but I just can get on to it. Since I am no where near an expert for switch configuration I took it as an opportunity to learn something more about it. I found a spare switch EX2200 no LCD version and now trying to configure it for our network.
0 kommentar(er)
